Boyatup Drilling Commenced
Released
Released
Announcement PDF
24 March 2022
ASX ANNOUNCEMENT
Boyatup Drilling Commenced
Highlights:
•
Maiden aircore drill program at Boyatup Silica Sand
Project
ASX: VRX
•
Targeting a 2,000ha area for high grade silica sand
Shares on Issue:
558.4 million
Unlisted Options:
35.3 million
VRX Silica Limited (VRX or Company) (ASX: VRX) is pleased
to announce a 100 hole air core drill program has commenced
at its Boyatup Silica Sand Project (Boyatup), located
approximately 100km east of Esperance, Western Australia.
Results of early work undertaken by VRX and the previous
tenement holder indicated in-situ sand grades up to 99.7%
SiO2 with potential to produce a very low Fe2O3 product. 1
Drilling is expected to take up to 10 days with assay results to
follow in late April 2022. This drilling campaign is anticipated
to enable a maiden mineral resource to be estimated. Drilling
will also produce bulk material for metallurgical testwork to
determine the product quality that the project can produce.
VRX’s Managing Director Bruce Maluish said: “We are able to
use the expertise developed at our Arrowsmith and Muchea
silica sand projects to quickly evaluate the product potential
from this region.
“Early work here indicates the in-situ sand is finer than our
other projects and can produce a different product for a
different market. This in turn would expand the market for our
silica sand products.
The drilling is being undertaken pursuant to a program of
work, or POW, approved by the Department of Mining,
Industry and Regulation and Safety of Western Australia.
In addition, a heritage (site avoidance) survey undertaken by
the Esperance Tjaltjraak Native Title Aboriginal Corporation
(ETNTAC) has cleared the area for the proposed activity.
Environmental studies over the area have commenced.
1
ASX announcement of 4 February 2019, “Acquisition of Boyatup Silica Sand Project”
Capital Structure
Corporate Directory
Paul Boyatzis
Non-Executive Chairman
Bruce Maluish
Managing Director
Peter Pawlowitsch
Non-Executive Director
David Welch
Non-Executive Director
Ian Hobson
Company Secretary
Silica Sand Projects
Arrowsmith Silica Sand
Projects, 270km north of
Perth, WA.
Muchea Silica Sand
Project, 50km north of
Perth, WA.
Boyatup Silica Sand
Project, 100km east of
Esperance, WA.
The Company is actively
assessing other silica
sand projects in
Australia.
Location and environs
The project is located 100km east of the port town of Esperance, Western Australia (Figure 1
below) and is connected to the Esperance bulk port via the sealed road Fisheries Road which
by-passes the city of Esperance. The Esperance bulk port is capable of handling Cape sized
vessels of up to 200,000t.
Figure 1: Boyatup Project Location and Drilling Target
The vegetation at Boyatup lends itself to the Company’s unique environmental rehabilitation
technique, known as vegetation direct transfer or VDT, that will be used at Arrowsmith and
Muchea. For further information on this method, see:
https://vrxsilica.com.au/miningandrehabilitationmethodology/
VRX has commissioned an environmental desktop study to commence the compilation of
required documents. A photograph of the general vegetation type at Boyatup is set out in
Figure 2.
Figure 2: Boyatup Vegetation
Historic work
Boyatup was acquired by VRX in February 20192 with two different sand types having been
sampled.
ELEMENTS
Yellow Sand
White Sand
Al2O3
CaO
Fe2O3
K2O
MgO
Na2O
TiO2
SiO2 Calc.
ppm
ppm
ppm
ppm
ppm
ppm
ppm
%
6,710
1,478
150
<100
2,534
339
320
247
169
55
163
103
1,344
886
98.9
99.7
The particle size distribution of the silica sand samples, Figure 3, shows that both types of
sand are very fine grained and +90% passing 300um. Typical glass sand specification requires
a top size of <600um indicating glass grade products of this size will be desirable to end users.
2 ASX announcement of 4 February 2019, “Acquisition of Boyatup Silica Sand Project”
Figure 3: Particle size distribution graphs of sand
During the mid-1990’s RGC Limited explored the Boyatup area for mineral sands. RGC
targeted this area as it lay on an interpreted paleo coastline, Figure 4.
Figure 4: Cenozoic Sediments over Boyatup Project
The Pallinup Siltstone overlays the Werillup Formation sits unconformably on the Proterozoic
granite basement. The Pallinup Siltstone is a said to have 3 facies units; Spongolite, Sand/Silt
and Siltstone (Johnson and Baddock, 1998). The RGC Section shown in Figure 5 shows the
surface quaternary deposits of “Sand” and “Clayey Sand” sitting above weathered and then
unweathered Pallinup Siltstone. The Pallinup siltstone therefore is the source of the targeted
silica sand and the RGC logging is interpreted as equivalent to the sampled white and yellow
sands respectively.
Figure 5: RGC Drill Section
Drilling Target
Figure 6 shows the location of the 2,000ha Drilling Target to be explored. This area makes up
less than 20% of the Company’s tenure, 100% of which is interpreted to have potential for
high grade silica sand.
Figure 6: Drilling Target
Exploration Target
The Company has developed an Exploration Target for the area to be drilled at Boyatup that
is estimated to contain 30Mt to 60Mt of high grade silica sand at 98% to 99% SiO2 grade.
The estimation is based on the following assumptions:
•
•
•
•
•
Exploration Target area 2,000ha – the area being drill tested, see Figure 6.
1.6t/m3 in situ bulk density – the dry in situ bulk density is consistent with other
VRX silica sand deposits and is considered appropriate here.
25% to 40% of the area contains high grade silica sand – the % of drill area that
is silica sand is indicated by prior exploration in the area, see Figure 5
Depth of high grade sand 4 to 5m – the range of sand depth is indicated by prior
exploration in the area, see Figure 5
In-situ grade ranges from 98% to 99% SiO2 – the grade range reflects prior VRX
sampling
The Exploration Target estimation is therefore estimated using the following calculation:
•
2,000ha x 1.6t/m3 x 25% (low) 40% (high) x 4m (low) 5m (high) = 30Mt to 60Mt
Details of previous exploration work undertaken at Boyatup is set out in the Company’s
announcement released to ASX on 4 February 2019. The material assumptions underpinning
the Exploration Target and detailed in that announcement continue to apply and have not
materially changed.
The potential quality and grade of the Exploration Target is conceptual in nature. There has
been insufficient exploration to estimate a Mineral Resource. It is uncertain if further exploration
will result in the estimation of a Mineral Resource.
Competent Persons’ Statement
The information in this document that relates to the Boyatup Silica Sand Project exploration
results and exploration target is based on, and fairly represents, information compiled by
Mr David Reid, who is a full-time employee of VRX Silica Limited. Mr Reid, BSc (Geology), is
a registered member of the Australian Institute of Geoscientists and has sufficient experience
that is relevant to the style of mineralisation and type of deposit under consideration and the
activity being undertaken to qualify as a Competent Person under the 2012 edition of the
Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves
(JORC Code). Mr Reid consents to the inclusion of the data in the form and context in which
it appears.
This announcement has been authorised for release to the ASX by VRX Managing Director
Bruce Maluish.
Further information:
Bruce Maluish
Managing Director
brucem@vrxsilica.com.au
0418 940 417
Peter Klinger
Cannings Purple
pklinger@canningspurple.com.au
0411 251 540.
About VRX Silica
VRX Silica Ltd (ASX: VRX) is developing world-class, high-grade silica sand projects in Western Australia.
The Arrowsmith North and Arrowsmith Central Silica Sand Projects, 270km north of Perth, comprise two granted
mining leases. Arrowsmith North is at an advanced stage with an EPA approved Environmental Scoping Document.
Bankable feasibility studies for both projects have demonstrated exceptional financial metrics.
The Muchea Silica Sand Project, 50km north of Perth, comprises three granted exploration licences as well as one
granted mining lease. Muchea is a world-class project with high-purity silica sand in situ suitable for beneficiation to
ultra-clear glassmaking quality particularly for solar panels. A bankable feasibility study has demonstrated
outstanding financial metrics.
The Boyatup Silica Sand Project, 100km east of Esperance, comprises two adjacent granted exploration licences.
Initial indications are that this project can complement the Arrowsmith and Muchea projects and add to the range of
silica products VRX Silica may be capable of producing. Drilling is now underway.
Proven Management
VRX Silica’s Board and Leadership Team have extensive experience in mineral exploration and mine developmentto-production and in the management of publicly listed mining and exploration companies.
Project Locations
Share your feedback
Discover