Sandfire RC Drilling at Thaduna Copper Project
Released
Released
Announcement PDF
2 October 2015
ASX ANNOUNCEMENT
SANDFIRE RC DRILLING AT THADUNA COPPER PROJECT
Ventnor Resources Ltd (ASX:VRX) (Ventnor or the Company)
is pleased to announce that Sandfire Resources NL (ASX:SFR)
has completed an RC drill program at the Company’s Thaduna
copper project in Western Australia.
ASX: VRX
Significant results include:
Shares on Issue 137.5 million
TDRC001
5m @ 3.19% Cu, 9.62g/t Ag from 251m DH
Unlisted Options 13.4 million
TDRC004
4m @ 1.53% Cu, 1.90g/t Ag from 193m DH
Capital Structure
Market Cap @ 4.0¢ a share
$5.5 million (Fully Diluted)
o
The RC drill program entailed drilling 5 holes at a dip of 63 to an
average depth of approximately 240 metres down hole.
Holes had been planned and selected to target gaps in drill
coverage over the main ore body, between known mineralisation
intercepts and to test drill methods to keep RC resource
definition holes and diamond pre collars at the proposed
trajectory. The Thaduna copper project is susceptible to
significant drillhole deviation.
On 4 December 2013 Ventnor entered a JV agreement with
Sandfire Resources NL (Sandfire) on the historic
Thaduna/Green Dragon copper project located 170km north of
Meekatharra in Western Australia. At that date Sandfire acquired
a 35% interest in the project and management of the JV.
Sandfire currently has an exploration spend obligation on the
tenements in order to satisfy the second tranche requirements to
move to a 51% interest in the JV.
This JV transaction represents substantial value accretion for
Ventnor shareholders by:
Reducing the previous project capital cost estimate of
$70M included in the Scoping Study (completed February
2013) to only the establishment costs.
Sandfire providing all JV funding through to production
from contributions and interest-free loans;
Ventnor not incurring additional financing costs to develop
the project;
Minimising on-going equity dilution for current
shareholders; and
Lower processing costs at Sandfire’s DeGrussa plant
because of its higher throughput rate compared to that
contemplated in the Ventnor Scoping Study.
Corporate Directory
Paul Boyatzis
Non-Executive Chairman
Bruce Maluish
Managing Director
Peter Pawlowitsch
Non-Executive Director
John Geary
Company Secretary
Company Projects
Thaduna/Green Dragon
Copper Project in the
Doolgunna district, WA
(subject to SFR Farm-in)
Black Dragon Gold project
adjacent to the Tropicana
Gold Mine
Warrawanda Nickel Project
south of Newman, WA
Georgina Basin IOCG Project
in western Queensland
The Company is actively
assessing other base metal
projects in Australia.
TDRC003 did not reach the ore zone and not shown in the above image.
True widths will be estimated following final downholes survey data.
Detailed Information
At the time of commencement of the Joint Venture with Sandfire Resources, Ventnor had
completed 221 RC holes for 29,041 metres with 79 Diamond Tails for 20,485 metres,
totaling 49,526 metres at the Thaduna Project.
Long section image is from the Ventnor defined Resource with some of the significant
intercepts.
Sandfire RC Drill Hole program September 2015
Hole Id
Easting
Northing
Az (AMG)
Dip
Hole Depth
From
To
TDRC001
772517
7176167
52.3
-63
300
251
256
222
NSA
Hole incomplete
TDRC002
772600
7176071
61.0
-63
TDRC003
772606
7175988
44.3
-63
220
TDRC004
772814
7175794
52.3
-63
227
TDRC005
772716
7175974
52.3
-63
245
193
197
DH m
Cu %
Ag ppm
3.19
9.62
1.53
1.90
5
4
NSA
Cu tabled assays > 0.5% Cu
Competent Person’s Statement
The information in this release that relates to Exploration Results is based on, and fairly represents,
information compiled by Mr David Reid who is a Member of the Australasian Institute of Mining and
Metallurgy (MAusIMM). Mr Reid is a contractor to Ventnor Resources Limited. Mr Reid has sufficient
experience which is relevant to the style of mineralisation and type of deposit under consideration and
to the activity which he is undertaking to qualify as a Competent Person as defined in the “2012
Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves”. Mr Reid consents to the inclusion in this report of the matters based on information
provided by him and in the form and context in which it appears.
For further information please contact:
Bruce Maluish, Managing Director
brucem@ventnorresources.com.au
Tel: +61 8 9226 3780
www.ventnorresources.com.au
Media: Warrick Hazeldine/Luke Forrestal
Cannings Purple
Tel: +61 8 6314 6300
whazeldine@canningspurple.com.au
APPENDIX A – JORC 2012 Table 1
Section 1 Sampling Techniques and Data
Section 1: Sampling Techniques and Data
Criteria
JORC Code Explanation
Sampling
techniques
Drilling
techniques
Commentary
Nature and quality of sampling (eg cut channels, random
chips, or specific specialised industry standard measurement
tools appropriate to the minerals under investigation, such as
down hole gamma sondes, or handheld XRF instruments,
etc). These examples should not be taken as limiting the
broad meaning of sampling.
RC samples are collected by a cone splitter for single metre samples or by a
sample scoop for first pass composite samples using a face sampling hammer
with a nominal 140mm hole.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Sampling is guided by Sandfire protocols as per industry standard.
Aspects of the determination of mineralisation that are
Material to the Public Report.
In cases where ‘industry standard’ work has been done this
would be relatively simple (eg ‘reverse circulation drilling was
used to obtain 1 m samples from which 3 kg was pulverised
to produce a 30 g charge for fire assay’). In other cases more
explanation may be required, such as where there is coarse
gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules)
may warrant disclosure of detailed information.
RC sample are crushed to -4mm through a Boyd crusher and representative
subsamples pulverised via LM5.
Pulverising is to nominal 90% passing -75µm and checked using wet sieving
technique.
Samples are assayed using Mixed 4 Acid Digest (MAD) 0.3g charge and
MAD Hotbox 0.15g charge methods with ICPOES or ICPMS.
Fire Assay is completed by firing 40g portion of the sample with ICPMS finish.
Drill type (eg core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc) and details (eg
core diameter, triple or standard tube, depth of diamond tails,
face-sampling bit or other type, whether core is oriented and
if so, by what method, etc).
RC drilling is with sampling hammer of nominal 140mm hole.
All drill collars are surveyed using RTK GPS with downhole surveying.
Downhole surveying is undertaken using a gyroscopic survey instrument.
Criteria
Drill sample
recovery
JORC Code Explanation
Method of recording and assessing core and chip sample
recoveries and results assessed.
Commentary
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Logging
Sub-sampling
techniques and
sample
preparation
Sample parameters and comments recorded by field technician into sample
sheets
Total sample weight recorded by the lab and supplied with assay results and
added to database
Appropriate measures are taken to maximise sample recovery and ensure the
representative nature of the samples.
RC sampling is good with almost no wet sampling in the project area.
Samples are routinely weighed and captured into the central secured
database.
No sample recovery issues have impacted on potential sample bias.
Whether a relationship exists between sample recovery and
grade and whether sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies and
metallurgical studies.
Geological logging is completed for all holes and representative across the
orebody. The lithology, alteration and structural characteristics of core are
logged directly to a digital format following procedures and using Sandfire NL
geologic codes. Data is imported into Sandfire NL’s central database after
validation in LogChief™.
Whether logging is qualitative or quantitative in nature. Core
(or costean, channel, etc) photography.
Logging is both qualitative and quantitative depending on field being logged.
All cores are photographed.
The total length and percentage of the relevant intersections
logged.
All drillholes are fully logged.
If core, whether cut or sawn and whether quarter, half or all
core taken.
Core orientation are completed where possible and all are marked prior to
sampling. Half core samples are produced using Almonte Core Saw. Samples
are weighed and recorded.
Criteria
JORC Code Explanation
Commentary
If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
RC samples are split using a cone or riffle splitter. A majority of RC samples
are dry. On occasions that wet samples are encountered they are dried prior
to splitting with a riffle splitter.
For all sample types, the nature, quality and appropriateness
of the sample preparation technique.
All samples are sorted, dried at 80° for up to 24 hours and weighed. All RC
samples are processed by Boyd crusher to -4mm.
Sample splits are weighed at a frequency of 1:20 and entered into the job
results file. Pulverising is completed using LM5 mill to 90% passing 75%µm
using wet sieving technique.
1:20 grind quality checks are completed for 90% passing 75%µm criteria to
ensure representativeness of sub-samples.
Quality of assay
data and
laboratory tests
Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
Measures taken to ensure that the sampling is representative
of the in situ material collected, including for instance results
for field duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the
material being sampled
The sample sizes are considered appropriate for the VHMS and Gold
mineralisation types.
The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is
considered partial or total.
Samples are assayed using Mixed 4 Acid Digest (MAD) 0.3g charge and MAD
Hotbox 0.15g charge methods with ICPOES or ICPMS. The samples are
digested and refluxed with a mixture of acids including Hydrofluoric, Nitric,
Hydrochloric and Perchloric acids and conducted for multi elements including
Cu, Pb, Zn, Ag, As, Fe, S, Sb, Bi, Mo, Re, Mn, Co, Cd, Cr, Ni, Se, Te, Ti, Zr,
V, Sn, W and Ba. The MAD Hotbox method is an extended digest method that
approaches a total digest for many elements however some refractory
minerals are not completely attacked. The elements S, Cu, Zn, Co, Fe, Ca,
Mg, Mn, Ni, Cr, Ti, K, Na, V are determined by ICPOES, and Ag, Pb, As, Sb,
Bi, Cd, Se, Te, Mo, Re, Zr, Ba, Sn, W are determined by ICPMS. Samples are
analysed for Au, Pd and Pt by firing a 40g of sample with ICP AES/MS finish.
Lower sample weights are employed where samples have very high S
Sampling is carried out in accordance with Sandfire protocols as per industry
best practice.
No field duplicates have been taken.
Criteria
JORC Code Explanation
Commentary
Verification of
sampling and
assaying
contents. This is a classical FA process and results in total separation of Au,
Pt and Pd in the samples.
The analytical methods are considered appropriate for this mineralisation
styles.
For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining the
analysis including instrument make and model, reading
times, calibrations factors applied and their derivation, etc.
No geophysical tools are used in the analysis.
Nature of quality control procedures adopted (eg standards,
blanks, duplicates, external laboratory checks) and whether
acceptable levels of accuracy (ie lack of bias) and precision
have been established.
The verification of significant intersections by either
independent or alternative company personnel.
Sandfire DeGrussa QAQC protocol is considered industry standard with
standard reference material (SRM) submitted on regular basis with routine
samples. SRMs and blanks are inserted at a minimum of 5% frequency rate.
Significant intersections have been verified by alternative company personnel.
The use of twinned holes.
None of the drillholes in this report is twinned.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
Primary data are captured on field tough book laptops using Logchief™
Software. The software has validation routines and data is then imported into
a secure central database.
Discuss any adjustment to assay data.
The primary data is always kept and is never replaced by adjusted or
interpreted data.
Criteria
JORC Code Explanation
Location of data
points
Accuracy and quality of surveys used to locate drill holes
(collar and down-hole surveys), trenches, mine workings and
other locations used in Mineral Resource estimation.
Commentary
Specification of the grid system used.
Coordinate and azimuth are reported in MGA 94 Zone 50.
Quality and adequacy of topographic control.
Topographic control was established from aerial DTM and Photography flown
by Aerometrex Digital Mapping Specialists on 9/8/2014
Resolution to 15cm
Data spacing
and distribution
Sandfire Survey team undertakes survey works under the guidelines of best
industry practice.
All drill collars are accurately surveyed using RTK GPS system within +/50mm of accuracy (X, Y, Z).
Downhole survey completed by gyroscopic downhole methods at regular
intervals.
Data spacing for reporting of Exploration Results.
TDRC001 – TDRC005 have been drilled to intersect the modelled
mineralisation surface from previous drilling
These holes were drilled to determine if downhole deviation in varying parets
of the ore body could be controlled using different drilling configurations and
methods. This knowledge would aid drill targeting.
Spacing between holes is as indicated on supplied maps and ranges from
80m-200m between collar points
TDRC001, TDRC004 and TDRC005 intersected the target model
TDRC002 and TDRC003 were abandoned due to problems with ground
conditions
Drill hole spacing and orientation is currently determined as approximately
perpendicular to the strike of the mineralised fault structure
No Mineral Resource or Ore Reserve is reported in this release.
No sample compositing have been applied to the Exploration Results.
Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
Whether sample compositing has been applied.
Criteria
JORC Code Explanation
Orientation of
data in relation
to geological
structure
Whether the orientation of sampling achieves unbiased
sampling of possible structures and the extent to which this is
known, considering the deposit type.
Commentary
The entire program, of which these holes are a preliminary subset, was initially
planned to achieve a certain uniform of sampling across the modelled
mineralisation structure
Subject to hole deviations these hole should intersect mineralisation close to
perpendicular
If the relationship between the drilling orientation and the
orientation of key mineralised structures is considered to
have introduced a sampling bias, this should be assessed
and reported if material.
Sample security
The measures taken to ensure sample security.
Appropriate security measures are taken to dispatch samples to the
laboratory. Chain of custody of samples is being managed by Sandfire
Resources NL. Samples are stored onsite and transported to laboratory by a
licence transport company in sealed bulka bags. The laboratory receipts
received samples against the sample dispatch documents and issues a
reconciliation report for every sample batch.
Audits or
reviews
The results of any audits or reviews of sampling techniques
and data.
No external audits or reviews of the sampling techniques and data have been
completed.
The hole trace of TDRC004 swung into the fault, leading to a slight potential
sample orientation bias.
All other holes that penetrated the mineralised structure passed through
approximately perpendicularly to the surface, and should therefore be
considered unbiased.
Section 2: Reporting of Exploration Results
Criteria
Mineral
tenement and
land tenure
status
Commentary
Type, reference name/number, location and ownership
including agreements or material issues with third
parties such as joint ventures, partnerships, overriding
royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting
along with any known impediments to obtaining a
licence to operate in the area.
Exploration
done by other
parties
Acknowledgment and appraisal of exploration by other
parties.
Geology
Deposit type, geological setting and style of mineralisation.
Drill hole
Information
The Thaduna (M52/1061) and Green Dragon (M52/1060) projects are wholly
owned by Ventnor Resource NL and its subsidiary, Delgare Pty Ltd.
Sandfire Resources NL entered into a Joint Venture arrangement on
December 4th 2013 for the right to continue exploration and pre-feasibility
mining evaluation on the Thaduna and Green Dragon deposits.
All tenements are current and in good standing.
A Land Access Agreement (LAA) exists for the Project between the YugungaNya People and Ventnor. Subsequent to the execution of the Farm-In Joint
Venture Agreement, Sandfire assumed management of the LAA.
Significant work, including historic mining, has been undertaken at the
Thaduna Site over the past 70 years
Exploration work completed prior to this
A summary of all information material to the understanding of
the exploration results including a tabulation of the following
information for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea
level in metres)
of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
If the exclusion of this information is justified on the basis that
The principal exploration target at the Thaduna Project is copper
mineralisation below the pit, hosted within a major NW -SE striking fault
Refer to Appendix 1 of this accompanying document.
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
the information is not Material and this exclusion does not
detract from the understanding of the report, the Competent
Person should clearly explain why this is the case.
In reporting Exploration Results, weighting averaging
techniques, maximum and/or minimum grade truncations (eg
cutting of high grades) and cut-off grades are usually Material
and should be stated.
Significant intersections are based on greater than 0.5% Cu and may include
up to a maximum of 3.0m of internal dilution, with a minimum composite grade
of 1.0% Cu.
Cu grades used for calculating significant intersections are uncut.
Where aggregate intercepts incorporate short lengths of high
grade results and longer lengths of low grade results, the
procedure used for such aggregation should be stated and
some typical examples of such aggregations should be
shown in detail.
Reported intersections are based on a regular sample interval of 1m or 5m
composites in regular drilling subject to location of geological boundaries.
Minimum and maximum sample intervals used for intersection calculation are
0.3m and 1.2m respectively.
The assumptions used for any reporting of metal equivalent
values should be clearly stated.
No metal equivalents are used in the intersection calculation.
Where core loss occurs; the average length-weighted grade of the two
adjacent samples are attributed to the interval for the purpose of calculating
the intersection. The maximum interval of missing core which can be
incorporated with the reported intersection is 1m.
These relationships are particularly important in the reporting
of Exploration Results.
Downhole intercepts of mineralisation reported in this release are from
drillholes orientated perpendicular to a modelled mineralisation envelope. The
drillhole may not necessarily be perpendicular to the mineralised zone. All
widths reported are downhole intervals.
If the geometry of the mineralisation with respect to the drillhole angle is known, its nature should be reported.
Due to hole deviation, the exact geometry of the mineralisation, relative to the
drillhole, is unknown at this stage.
If it is not known and only the down hole lengths are reported,
there should be a clear statement to this effect (eg ‘down
hole length, true width not known’).
All intersections reported in this release are downhole intervals. True widths
are not known.
Diagrams
Balanced
reporting
Other
substantive
exploration data
Further work
Appropriate maps and sections (with scales) and tabulations
of intercepts should be included for any significant discovery
being reported These should include, but not be limited to a
plan view of drill hole collar locations and appropriate
sectional views.
Where comprehensive reporting of all Exploration Results is
not practicable, representative reporting of both low and high
grades and/or widths should be practiced to avoid
misleading reporting of Exploration Results.
Other exploration data, if meaningful and material, should be
reported including (but not limited to): geological
observations; geophysical survey results; geochemical
survey results; bulk samples – size and method of treatment;
metallurgical test results; bulk density, groundwater,
geotechnical and rock characteristics; potential deleterious or
contaminating substances.
The nature and scale of planned further work (eg tests for
lateral extensions or depth extensions or large-scale step-out
drilling).
Diagrams clearly highlighting the areas of possible
extensions, including the main geological interpretations and
future drilling areas, provided this information is not
commercially sensitive.
Appropriate maps are included within the body of the accompanying
document.
The accompanying document is considered to represent a balanced report.
Other exploration data collected is not considered as material to this document
at this stage. Further data collection will be reviewed and reported when
considered material.
These holes were intended as a preliminary pilot study drilled prior to
commencing a further 30 hole resource definition program, intended to bring
the central portion of the previously released inferred resource up to JORC
indicated status.
ABOUT VENTNOR
Ventnor Resources is a base-metals focused explorer with a farm-in JV with Sandfire Resources NL at the
historic Thaduna/Green Dragon project, 170 km north of Meekatharra in Western Australia.
The Thaduna/Green Dragon Project is located 40km east of DeGrussa and represents the largest copper
resource in the Doolgunna-Bryah Basin Region outside of Sandfire’s DeGrussa-Doolgunna Project.
As announced, the Company has recently been granted a tenement adjacent to the Tropicana Gold Mine
in WA that is prospective for gold and has had preliminary exploration comprising mapping and rock chip
sampling and a recently completed an initial drill program.
Also in Western Australia, 40 km south of Newman is the Warrawanda nickel project. In western
Queensland, the Georgina Basin project lies within the Mt Isa Inlier, which is well endowed with Iron
Oxide Copper Gold (“IOCG”) systems and sulphide base-metal deposits.
Known Copper and Nickel Mineralisation
The Thaduna/Green Dragon copper project has historic mine production; copper mineralisation has been
confirmed with four phases of exploration drilling; a Scoping Study has confirmed the economic potential
of the project. A farm-in deal has been transacted with Sandfire Resources to develop the project and to
treat ore. The prospectivity of the Warrawanda nickel project was increased when nickel gossans were
identified in recent work. Further work is planned later in 2015.
Proven Management
The Ventnor directors have extensive experience in the management of publicly listed mining and
exploration companies.
The Company is actively seeking and evaluating other base metals projects in Australia.
PROJECT LOCATIONS
Share your feedback
Discover